BENDPAK PL-6000DC PARKING LIFT

BENDPAK PL-6000DC PARKING LIFT

 6,000 LB. CAPACITY / TWO-POST PARKING LIFT / SHARED COLUMNS / SPECIAL ORDER

The PL-6000DC is a two-post parking lift with car storage capacity of up to 6,000-pounds. This parking lift is designed to be ganged together with shared columns allowing you to fit more units into a smaller space. Can be installed in either indoor or outdoor locations.

$7,895.00 PICKED UP (PLUS TAX) PLEASE CALL FOR SHIPPING / DELIVERY & INSTALLATION COST.

SPECIFICATIONS: PL-6000DC
Ganged column design allows multiple installations in minimum space

Commercial grade design and construction

Galvanized and corrugated anti-slip platform

Freestanding design when ganged two or wide

Overhead power unit provides smooth quiet hydraulic operation

Designed for installation on typical parking surfaces

Platform can be stopped at different heights to fit various vehicles and ceiling heights

Full width channel-locked center panels protect lower vehicle

Wide deck platform accommodates pickups, vans and cars.

Single direct-drive hydraulic cylinder

Automatic safety lock combined with anti-fall device hold platform securely

Maintenance free composite carriage bearings

Electric key switch for security and safety

Automatic shut-off when operator releases key switch

Features a rugged and reliable Manual Safety Lock Release

Hydraulic overloading protection

Mechanical safety locks are spaced every 4 inches

24VAC Operator controls

Automatic locking system during power outage

Emergency stop button

Upper limit switch

Pressure relief valve and pressure compensated flow control valve to ensure safe operation and level lifting

Industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass

Overall Height: 131” (3,327.4mm)

Note: does not include the 2.5 in. / 57 mm Max. for Balance Chain Adj.

Overall Length: 167.25” (4,250 mm)

Overall Width: 100.25” (2,547 mm)

Lifting Height: 82.5” (2,100 mm)

Usable Platform Width: 82.5” (2,100 mm)

Platform Length: 157” (3,990 mm)

Electrical Required: 110 or 220 VAC 50/60 Hz.

Single or Three Phase (specify when ordering)

Control Power: 24 VAC

Lock Release: Manual Release

Power Pack: 2.2kw hydraulic power pump

Lifting / Lowering Time: 50 / 45 sec.

DESCRIPTION: The PL-6000DC dual-column parking lift is designed to accommodate a wide array of vehicles including SUVs, sedans, and sports cars. It offers the perfect combination for both long-term and short-term parking. Typically long-term parking is the upper level and short-term parking below. The PL-6000DC was specifically designed to accommodate the needs of real estate developers, architects, engineers, automotive dealers, and commercial parking operators. The PL-6000DC can be installed inside a typical 8-foot parking space and accommodate most cars and light trucks. They operate in both indoor and outdoor locations.

Advantages: Low Operating Cost

Platform driven by gravity when lowered. No electric motor consumption is required.

Fast and Easy Installation

Installation is fast and easy. A detailed installation manual is provided with floorplan and foundation drawings. Online videos are available to help customers through the installation process.

Ganged/Shared Columns

The posts can be shared which allows multiple installations in minimum space and reduces cost.

Professional Packing & Delivery

Professional packaging and our experienced logistic team ensures customers will get the product damage free. Compact package size means simple unloading and handling.

Dependable Hydraulic Operation

The PL-6000DC features a single direct-drive hydraulic cylinder eliminating the need for screw mechanisms and offers better reliability, smoother operation, and lower maintenance costs.

Automatic Safety Device

Powerful load-holding devices automatically engage and lock the lift structure as the parking lift raises, preventing sudden free fall in the unlikely event of a suspension component failure. Typically, after the lift is raised to the required working height, operators are instructed to lower the lift until it is resting safely on the locks to minimize wear on suspension components.

 INFO PROVIDED VIA BENDPAK: https://www.bendpak.com/car-lifts/parking-lifts/pl-6000dc/

FOLLOW US ON SOCIAL MEDIA!