BENDPAK HD-9SWX DOUBLE-WIDE 4-POST LIFT

BENDPAK HD-9SWX 4-POST DOUBLEWIDE LIFT

9,000-LB. CAPACITY / FOUR-POST LIFT / DUAL PLATFORM / SUPER WIDE / EXTENDED-LENGTH

$11,195.00 PICKED UP (PLUS TAX) PLEASE CALL FOR SHIPPING / DELIVERY & INSTALLATION COST.

HD-9SWX is ideal for anyone who wants a little extra standing room under their lift. Plus, the runways are 24" longer than our standard-length HD-SW. Park up to four cars, trucks and SUVs, and enjoy servicing two raised vehicles in a single lift.

DESCRIPTION: The Ultimate Extended-Length, High-Rise, Double-Wide Car Lift

If you're looking for a little more lifting height, extended-length runways and a lot less column interference, then our HD-9SWX four-post lift is the answer. This super-wide, extended-length model is designed to transform your garage into a state-of-the-art parking facility. It turns that two-car space into a four-car trophy stand. The HD-9SWX is an extended length model with higher rise to provide exceptional clearance underneath. The extra dimensions are particularly useful for parking or servicing long-wheelbase vehicles.

The best thing about this car lift is how easy it is to use. Low-stance vehicles glide onto the runways without risking damage to the chassis. It’s a smart solution for family garages and professional spaces. Auto shops sometimes prefer large lifts like the HD-9SWX because their techs need equipment that allows them to work on virtually anything that rolls through their doors. The 9,000-lb. capacity of this lift (4,500 lbs. max per car, per side) covers sedans and sports coupes. If you do need to step up into the next category of lifting, BendPak has four-post lift options, from the 14,000-lb. capacity HDS-14 series to the 40,000-lb. capacity HDS-40.

NOTE: Comes standard with 1 Kit(pair) of Aluminum Ramps (additional ramps may be purchased but are not provided)

Lifting Capacity: 9,000 lbs. (4,082 kg)

Max Capacity / Front Axle: 4,500 lbs. (2,041 kg)

Max Capacity / Rear Axle: 4,500 lbs. (2,041 kg)

Min. Runway Height: 7" (178 mm)

Max. Rise: 82" (2,083 mm)

Max. Lifting Height: 89" (2,261 mm)

Time to Full Rise: 65 seconds

Overall Width: 202" (5,131 mm)

Outside Length: 198" (5,029 mm)

Overall Length: 242.5" (6,159 mm)

Height of Columns: 102" (2,591 mm)

Width Between Columns: 192" (4,877 mm)

Drive-Thru Clearance: 178" (4,521 mm)

Runway Width: 19" (483 mm)

Length of Runways: 188" (4,775 mm)

Width Between Runways: 34.25" (870 mm) or 41" (1,041 mm)

Runway Centerline: 56.25" (1,429 mm) or 62.75" (1,594 mm)

Outside Edge of Runways: 75.25" (1,911 mm) or 81.75" (2,076 mm)

Minimum Wheelbase

Rated Capacity: 135" (3,429 mm)

75% Capacity: 115" (2,921 mm)

50% Capacity: 95" (2,413 mm)

25% Capacity: 80" (2,032 mm)

Locking Positions: 17

Lock Spacing: Every 4" (102 mm)

Power Unit Motor: 220 VAC / 60 Hz / 1 Ph

Noise: 45 dB

Shipping Weight: 3,038 lbs. (1378 kg)

Dimensions: 205'' x 22'' x 51'' (5,207 mm x 558 mm x 1,282 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

 INFO PROVIDED VIA BENDPAK: https://www.bendpak.com/car-lifts/four-post-lifts/hd-9swx/

FOLLOW US ON SOCIAL MEDIA!